March 17, 2023
motor-start-analysis-5

Analyze and Assess Electric Motor Performance in Compliance with Indonesian Legislation

Industrial electric motors are used to power a wide range of applications on a global scale. The International Energy Agency (IEA) estimates that the global energy consumption by the automotive industry is up to 70% of all industrial energy, 35% of energy used in the commercial and service sectors, and 45% of all electricity generated. Electric motors are crucial to many industrial activities since each hour of downtime brought on by a motor failure costs thousands of dollars. 
March 17, 2023
motor-start-analysis-2

How Can the Performance and Dependability of Commercial Motors Be Assessed?

The most environmentally friendly, economical, and rapid way to get consistent electricity is to increase energy efficiency. Over 46% of all electricity used and 69% of all energy used in the industrial sector is consumed by motors. One of the most important concerns that many businesses must deal with is energy use. The inadequate architecture and inefficient use of power must be addressed first. The main reasons for high electric costs and difficulties in meeting the increased demand for energy are poor design and inefficient use. 
March 17, 2023
power-system-3

The Study of the Power System Looks at Relay Coordination, Short Circuits, and Load Flow

To make sure that the power system at your facility is reliable, safe, and efficient under both normal and abnormal circumstances, a power system analysis comprises a variety of technical assessments as well as the use of scientific analytical ideas and techniques.  
March 17, 2023
power-system-5

The Importance of Load Flow and Short Circuit Analysis for Indonesian Companies

We are all aware of how important power is to our daily lives. Electricity generation, transmission, and distribution can only take place when the system is in balance. The most important piece of data needed to do a power system analysis on any system is the load flow. Load flow shows system voltage, actual and reactive power, and line losses.